Hi,
My mastercam x6 constanty freezes for a few minutes, every few minutes.
Hi,
My mastercam x6 constanty freezes for a few minutes, every few minutes.
This could be the computer you are running on. Have you talked to your dealer about this?
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
No we haven't, we've been using this system for years. We have another system with the same exact specs and they both run Mastercam for 8 hours a day and theres never any hang ups. The only difference between the two is that this one is formatted to Raid 0. I was wondering if there were any changes that we can make before resulting in buying a new workstation.
I did testing with Raid 0, Raid 1 and raid 5 years ago including scsi raid never found the gains like I have with SSD. are you using onboard raid or a raid card?
I would be that is casing the freezing. take of the Raid and add a SSD as the main. bet it will work better. I even tested Raid with two SSD but with and on board raid had isses .
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
I'm getting a new issue, now every few seconds the project screen turns white after no activity and comes back if I move. All I did was update drivers and reinstall mastercam and clearing the registry. I might give the SSD a try
What windows are you running and what video card?
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
Windows 7, Nvidia quadro 4000