[sting_dot]

hi,does anyone know where can i get mazak and mitsubishi service manual?

[Al_The_Man]

Mitsubishi available on the MEAU site.
Al.

[Mazaholic]

If you give Mazak the serial# of your machine, they can whip you out a complete set of manuals for your particular machine on one CD.
Cost is about $300 per machine.

[sting_dot]

i already have the programming,circuit diagram,mechanical part list,maintenance manual. that's the basic manual. what i want is the service manual which we need for machine maintenance. the information in the maintenance manual supplied with the machine is not enough. can anyone know where i can get it?

[Mazaholic]

If your looking for the electronics maintenance then i'd have to say the same thing AL said.
meau has alot of info that isn't included with the machine manuals.
I would still check with Mazak,they have service manuals but they might be more generalized than specific to one machine.

[Htech]

You can get a great deal of info for free from the MEAU tech support, but then again what you are probably looking for is in the MEAU red books, I know, I was employed with MEAU. If you cannot find specific info, I might be able to help.

Thanks,
Htech.

[gridley51]

Hi Htech.Have you got any repair info on the Freqrol FR-SE spindle drives and the FR-PW power supply that is part of them?
Mark.

[farzad]

If you give Mazak the serial# of your machine, they can whip you out a complete set of manuals for your particular machine on one CD.
Cost is about $300 per machine.

please contact me.
[email protected]

[rulo]

Hi there,

I have a Mazak Multiplex 620 Serial number 91037. I would like to buy the Service Manual and also the Mazatrol T32-6 Programming Manual. Where can i buy them?.