Does anyone know how to make a tool path to make these chamfers highlighted in blue on the image that I attached? I have got all the machining down perfect except for these chamfers. I have a 4th axis that is parallel to the X-axis and will do both indexable and simultaneous.
Thanks
Results 1 to 2 of 2
Threaded View
-
04-14-2014, 10:50 PM #1
Registered
- Join Date
- Jun 2012
- Posts
- 19
Solidcam / Inventorcam 4th axis chamfer?
Reply With QuoteSimilar Threads
-
3 axis milling operation with a chamfer mill?
By Brian Corwin in forum BobCad-CamReplies: 3Last Post: 03-10-2014, 07:16 PM -
Chamfer template bug - Inventorcam 2013
By glovebox20 in forum SolidCAM for SolidWorks and SolidCAM for InventorReplies: 2Last Post: 07-18-2013, 12:01 AM -
tapped hole chamfer with iscar chamfer tools
By dcutler35 in forum MastercamReplies: 7Last Post: 12-07-2012, 02:30 PM -
anybody tried Inventorcam?
By mattfurches in forum Uncategorised CAD DiscussionReplies: 0Last Post: 06-22-2012, 11:55 PM -
hw to control a 3 axis, to do a chamfer in a tube...???
By volvomech in forum G-Code ProgramingReplies: 1Last Post: 12-28-2011, 09:46 AM
Tags for this Thread
Posting Permissions
