Hi All,
Our TNC 145 control is acting up. Gus suggested replacing it with a 151. Anybody out there have one? It is a good solid machine and I would prefer to keep the current drives / power supply, etc.
Thanks,
H
Hi All,
Our TNC 145 control is acting up. Gus suggested replacing it with a 151. Anybody out there have one? It is a good solid machine and I would prefer to keep the current drives / power supply, etc.
Thanks,
H
Just happen to be going through a rebuild of a BP Interact and I'm in no need of any of these older parts
Shoot me a IM if your intrested I have all sorts of crazy parts from this thing
"Anything that can go wrong, will go wrong". {To Hell With Murphy FIX IT!}
Ajax CNC Kit it's a very well laid out kit has the option for everything a mill could ever use not done quite yet I'll post some pics of it on this page alittle later
"Anything that can go wrong, will go wrong". {To Hell With Murphy FIX IT!}
It can support SIX axis's and yes it can support Rigid Tapping but it is a option you have to buy and you have to get some encoders on the spindle
here's a blurb from thier website
"This option frees you from the cumbersome and sometimes inaccurate methods of tapping with floating and reversing tapping heads. You not only get standard rigid tapping, but also have the option of rigid peck tapping. Both the Spindle "S" function option and a spindle-mounted encoder are necessary for rigid tapping. Rigid Tapping $495
By the end of all this crap I'll be a BP interact series II guru
"Anything that can go wrong, will go wrong". {To Hell With Murphy FIX IT!}
Awesome! I also have a BP Interact 2. I like it a lot.
I recently added an encoder on the spindle and nowadays, do rigid tapping.
I also added a 4th axis to it. It is now an awesome machine. I use EMC2.
Rigid tapping cost me $90 in the form of cost of the encoder.
4th axis cost me $149 for a 12 inch CNC rotary table, $150 for an extra encoder card, $150 for a resolver to differential encoder converter.
I use EMC2...
I have an interest on this part Power Supply board Unit (230 802) this is a 120/220VAC type unit and powers the TNC151B CNC Bridgeport Interact I system with S/N:664171089C and schematic #:879-1304
Let me know if you still have these parts.
Regards
Sorry, I sold the all the parts about a year ago. But my Mach3 upgrade is working great. PM if you need some advice on the upgrade process
"Anything that can go wrong, will go wrong". {To Hell With Murphy FIX IT!}