Hello,
I was hoping someone could help me with me with my CO2 Laser.
Model: 460
Serial No: BGS195238
60W
110V
Laser was operating normally yesterday but did not turn on this morning. I have done the following in an attempt to resolve this issue.
First thing I checked was the emergency stop. Once I eliminated that I used an voltage meter to check the;
1. Power supply from the wall.
2. Power through cord.
3. Fuses were intact.
4. Power across power supply socket.
The water pump works and the laser tube is intact. I am not sure where to go from here and any help would be appreciated.
Thank you
Caleb