Originally Posted by
napwszzm
Hi Tarekkumar,
Thank you for the response. I have received the 600mm x 900mm small cnc router, but I am a little disappointed with the machine.
Firstly, it is very rough, not very well painted.
Secondly, the forgot to supply the power cable and the mach 3 software. At the end, the emailed me the instruction (but poorly described) and the mach 3 demo software.
Thirdly, and i think this is the most important, I followed their instructions and the machine still not running, even the spindle is not spinning that control from Mach 3.
I have spent almost 5 hours on managing the machine, but still failed to do so. I stuck on this, and still not knowing how to run the machine.
I have no idea is the problem coming from the software or from the motion controller or from others. The motion controlers model is XHC.
Now, I have to wait to Monday, they said they will get someone to help me online.
Not a very good experience for me.