587,267 active members*
3,648 visitors online*
Register for free
Login

Thread: Maho 800E Toolmagazine problem

Results 1 to 2 of 2
  1. 02-20-2009, 03:48 PM #1
    kotten1
    kotten1 is offline Registered
    Join Date
    Feb 2008
    Posts
    42

    Maho 800E Toolmagazine problem

    Hi

    I have some problem with the toolmagazine.

    Sometimes it starts to rotate when I run the machine.
    When it happens it rotates and then the machine stops and an error message appears:
    Intervention 1\0, E180 = No mag. SW. > Running time checkb
    It takes a couple of hours before it stops when it has begun rotating.
    It only happens sometimes.
    Does anyone have a clue?

    Regards Kotten1, Sweden
    Reply With Quote Reply With Quote
  2. 02-20-2009, 10:13 PM #2
    Paul Deady
    Paul Deady is offline Registered
    Join Date
    Dec 2008
    Posts
    14
    Hello Kotten,
    I have not worked on a Maho E M/C with an ATC.
    Never the less I would check all Proximity Switches and Limit switches within the ATC. The fault could be a dirty or loose proximity switch, with the machine's vibrations it could be enough to set it off. You may need to look also at the adjustment or positions.
    Paul Deady
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Maho MH 800E (CNC 432 Phillips)
    By kotten1 in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 7
    Last Post: 01-29-2016, 12:24 PM
  2. Problem with Maho Mh700 Y axis
    By mlautier in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 1
    Last Post: 05-04-2011, 02:24 PM
  3. MAHO-PHILIPS 432 M60 and G23 problem
    By micktat in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 4
    Last Post: 03-03-2009, 11:10 PM
  4. Maho mh500 fundament problem
    By smoregrava in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 3
    Last Post: 02-13-2008, 07:23 AM
  5. maho with TNC heidenhain comm problem
    By breazr in forum DNC Problems and Solutions
    Replies: 1
    Last Post: 05-30-2007, 04:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules