I remember you could hold a combination of keys for an 18M control to access the main software. do any of the other models have this function as well? 21T , 15M, 6M etc. ????
Results 1 to 3 of 3
-
12-05-2009, 09:40 AM #1
Registered
- Join Date
- Mar 2005
- Posts
- 76
At boot time press a combo of keys
-
12-07-2009, 03:51 PM #2
Registered
- Join Date
- Apr 2009
- Posts
- 1383
that would be any control with the pcmcia slot.
-
12-08-2009, 01:43 AM #3
Registered
- Join Date
- Apr 2009
- Posts
- 35
Be very careful!! Certain key combinations on a 6M give the directory. Other combinations on a 6M erase all programs. The key combinations are very similiar.
On an OM certain combinations initialize the main board. You will be entering all the parameters over. Another combination on the OM allows you to overide the zero return to re-establish home limits.
there are a few on the 10M for reaching the options pages.
Robert
Reply With QuoteSimilar Threads
-
Cold Boot Attacks on Encryption Keys
By CheekieMonkies in forum Computers / Desktops / NetworkingReplies: 2Last Post: 04-26-2024, 08:14 PM -
T-32 keys dead
By mbpp in forum Mazak, Mitsubishi, MazatrolReplies: 1Last Post: 02-10-2009, 11:14 AM -
Hot Keys
By jmerson in forum Dolphin CAD/CAMReplies: 4Last Post: 01-16-2009, 01:31 AM -
NorthStar Press Brake For 20 Ton Shop Press anyone ever use one?
By dsmdude in forum Bending, Forging, Extrusion...Replies: 6Last Post: 04-13-2007, 10:01 PM -
hot keys
By wireguy in forum Uncategorised CAM DiscussionReplies: 0Last Post: 05-23-2004, 04:07 AM
Posting Permissions
