[luisreynoso]

Hello everyone, we have a Milltronics RW15 with Centurion VII control. It is constantly giving us either an error 190 or 192 that halts the machine. It used to do this when it was on MDI mode or while running a program, but it started doing it as soon as it started up now. It won't even let me do zero return.

We are in Argentina, and the local dealer is taking forever to send help. Has anyone come across something similar?

Here's a screenshot of the error.

Thank you very much in advance.

[ZZZZ]

Try re-loading your parameters from the original disk shipped with the machine. You may have to copy the files to the C:\RAM folder from the DOS prompt. If this works, you will have to re-set your work and tool offsets, as well as any other parameters that you have changed since you got the machine.

If that does not work, send an e-mail to [email protected] with that screen shot and a hard copy of what it says so they can investigate that memory address to determine the cause of the error.

Let us know what happens so we all can learn.