I’d like to find either a 4 or 5 inch 3 jaw lathe chuck with top reversible jaws.
Has anybody ever seen one or know someone who has?
I want the top reversible jaws so I can make soft jaws.
I have a 6 inch chuck but that’s too big for my lathe.
I’d like to find either a 4 or 5 inch 3 jaw lathe chuck with top reversible jaws.
Has anybody ever seen one or know someone who has?
I want the top reversible jaws so I can make soft jaws.
I have a 6 inch chuck but that’s too big for my lathe.
Take a look here https://www.shars.com/products/workh...uck_diameter=5
Jim Dawson
Sandy, Oregon, USA
Victor Machinery has a Bison that looks like what you want. Description specifically notes soft-jaw compatible.
https://www.victornet.com/detail/P290-5.html
Glad I bought mine years ago. They ain't cheap.
I have a Bison 5 in 3 jaw with reversible jaws. I made made a DIY adjusta chuck to go with the 5C arbor.
Don
Attachment 418400
Attachment 418402
Attachment 418404
I bought a Bison chuck from Fowler years ago that has reversible jaws. Fuerda seems to make good quality chucks with reversible jaws as well. I have one of those on a 5C mount for those times when I don't want to breakdown my 5C drawbar.
I have a vintage Buck adjust Tru for my lathe.
Don
I also use the Bison 5in 3 jaw with reversible jaws with DIY adjusta-chuck on my lathe with the 5C closer. BTW I use soft jaws I make in the Tormach on my cheap chicom 6" 3 jaw.
Don
Attachment 418580
Attachment 418582
Boring softjaws under wire load
Attachment 418584