Recently bought a turret for my lathe, the turret came of a emco turn 120 machine.
The turret as it arrived (quickly put on the bed)
Turret backview.
Turretdisc removed (locking ring without bolts!)
Lockingring and rotation lock removed
Painted the turret house
peened the turretdisc and lockring (glass pearls)
Also done the boringbar holders
some parts mounted again
Need to make a reference switch on the backside, for indexing
Mountingplate for the servo motor, to drive the turret
but first 3 weeks on holiday.
if anyone has a schematic of the turret please post it.