This is my first post so bare with me. I am over a machine shop in the pipe fitting flange business. I edit all my programs with NCPlot. I was wondering if anyone knew of a DNC program (for uploading NC files to machine controller) that works in Windows 95 or 98. I found one that works with Windows 2000 or XP but all I have is a very old laptop. I would be uploading to Anilam, Fanuc, and Okuma controllers. Thanks for any help!!
Thread: NCPlot to DNC
Results 1 to 4 of 4
-
10-02-2006, 01:58 AM #1
Registered
- Join Date
- Sep 2006
- Posts
- 10
NCPlot to DNC
-
10-02-2006, 03:07 AM #2
Gold Member
- Join Date
- Mar 2003
- Posts
- 765
Have you tried the DNC functions in NCPlot? Look on the "DNC" menu.
Regards,
Scott
-
10-02-2006, 03:47 AM #3
Registered
- Join Date
- Sep 2006
- Posts
- 10
I'm using version 1.1 All I see in the file menu is (File, Edit, Format, View, Draw, and Help. Am I missing something somewhere? I'm new to this. I always modified the G-Code programs by hand when I worked at this machine shop 6 years ago. The plant has been closed for 6 years and I am just starting back to work for them. I'm just now learning about all the different software for G Code programming. I will go check out NCplot's website and see what I can figure out. I didn't know they had that capability.
Thanks
T. Hardy
-
10-02-2006, 12:04 PM #4
Gold Member
- Join Date
- Mar 2003
- Posts
- 765
Oh, sorry, the DNC functions are only available in the version 2 betas.
Scott
Reply With Quote
Posting Permissions
