587,308 active members*
3,693 visitors online*
Register for free
Login

Thread: TNC370 Machine to Computer communication

Results 1 to 2 of 2
  1. 01-26-2010, 07:28 AM #1
    wahidbashir
    wahidbashir is offline Registered
    Join Date
    Nov 2006
    Posts
    53

    TNC370 Machine to Computer communication

    Hello Members.
    How to interface Haidenhain TNC370 control to Computer using RS232 using TNCremo. One side from Control to PC is properly communicating while data is not being transferred from Machine to control. I have checked cable connection and are OK. because this cable is working on the other machine having control
    TNC407.
    TNC407 support LSV2 protocol but TNC 370 support ME and FE.
    How to solve the problem.
    What should be the values of parameters.
    Advance thanks for ur kind attention.
    Reply With Quote Reply With Quote
  2. 02-14-2010, 09:12 AM #2
    Jukka Honkanen
    Jukka Honkanen is offline Member
    Join Date
    Nov 2008
    Posts
    69
    Start the TNCserver under TNCremoNT.
    Or you can start the server alone.
    All the communication commands (send / receive) is done on the TNC370.
    Or you can change the whole control to iTNC530.
    That´s what I did.
    Attached Thumbnails Attached Thumbnails 25082009605.jpg  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Bridgeport 1000/22 TNC370 Lube Cycle Parameters
    By BetaBob in forum Bridgeport / Hardinge Mills
    Replies: 5
    Last Post: 07-07-2009, 06:07 AM
  2. Communication issue with a EZ Track DX with Computer
    By biker_eh in forum Bridgeport / Hardinge Mills
    Replies: 4
    Last Post: 10-26-2008, 01:43 PM
  3. Setting up computer/machine communication
    By MrWild in forum Dolphin CAD/CAM
    Replies: 0
    Last Post: 06-04-2008, 12:56 AM
  4. Problems connecting laptop to TNC370
    By iknownothing in forum Bridgeport / Hardinge Mills
    Replies: 2
    Last Post: 01-24-2008, 01:26 PM
  5. machine communication coreldraw11-12
    By hpc laser u.k in forum DNC Problems and Solutions
    Replies: 2
    Last Post: 06-28-2007, 02:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules