Sounds like a faulty drive, go to our website and request an RMA, and we will have look at it.
http://www.motioncontrolproducts.com/returns.html
Originally Posted by
Oldmanandhistoy
MSD556 DRIVER FAULT
http://motioncontrolproducts.co.uk/r...62830deeaf7241 for all info for this driver.
I have a fault LED lit on one of my drivers and consequently no movement in my Z axis.
If I plug the wires into the driver from another axis (which works ok) the fault light stays on.
If I swap the plugs onto another driver the axis works fine, so definitely a fault with the driver.
Linear unregulated PSU @ 44vdc 13A (not daisy chained to 3 drivers) working ok.
Any ideas or is this just a faulty driver?
Any help very much appreciated.
John
Motion Control Products Ltd
www.motioncontrolproducts.co.uk