[Wingnut69]

The list they sent starts at N10300 and goes to N10399. I'm assuming they represent numbers 300-399. But in the control lines 310 and 311 are only 1 digit. The list has a normal 8 digit number for the bits. I can input the number in 310 and it enters leaving the preceding zeros out. (00101100 enters as 101100)However when I try to input 311 (00000001) nothing happens. It won't input the number whether I put it in as a 1 digit number or an 8 digit number.

[STLMachinist]

The list they sent starts at N10300 and goes to N10399. I'm assuming they represent numbers 300-399. But in the control lines 310 and 311 are only 1 digit. The list has a normal 8 digit number for the bits. I can input the number in 310 and it enters leaving the preceding zeros out. (00101100 enters as 101100)However when I try to input 311 (00000001) nothing happens. It won't input the number whether I put it in as a 1 digit number or an 8 digit number.

The list needs to be input via RS232. The control will convert the numbers into usable information for the control.

[Wingnut69]

So I can't input these by hand? All I have is a paper printout the company sent me.

[STLMachinist]

You can input by hand. But you need to convert binary to decimal.