[edeaton]

After loosing every machine paramater I was able to gather enough information to get my machine up and running with one exception. I am unable to get the spindle orient to work. It worked prior to the paramater loss. Can any one provide the paramaters and settings to get this working. Conquest 42, Fanuc OT control, Spindle Orient. I appreciate any and all help. Thank you
Ed

[RAIRW]

Ed

Did you get the machine all working?

[edeaton]

The Machine ( Conquest 42) is working great with the exception of the spindle orient. I did not have a copy of all of the paramater settings when we lost them. I do not know how to or have the information to get the spindle orient working. I am no expert to say the least.

[RAIRW]

Ed

We have a 42 with C axis and OT control, I can send you a copy of our parameters if you want to compare?

[edeaton]

RAIRW - That would be Awesome! I appreciate it.
My email is [email protected]
Again Thanks!

[MorueM]

Have you resolved your problem? I've gone through this in the last year, and was lucky enough to find the tech that had parameters from my machine backed up from 10years ago. If you want spindle orient, this means your machine has either B indexing or full C axis? The Conquest42 I have is only indexing/B, and the bit to activate the indexing capabilities was 914.7, if I can trust my notes. That's the 4th axis activation bit, which is the live tools. Might be worth a try. I can also send you the parameters from my machine if needed. Conquest42, B indexing, 10 tools turret with 5 live tools.

[edeaton]

MorueM - I have not had a chance to work on it lately but I would love to have a copy of your parameters. I will be working on it soon.
Thanks
Ed Deaton
[email protected]

[sting007]

Hi,

could any one send me the parameters, i have same machine with C-axis
[email protected]
thanks

[LS Brackets]

Rairw can you send share a copy with me? It would greatly help me and my machine.

Thank you
Darrin
[email protected]