I cannot get the geometry or toolpath nesting to work. When clicking on the nesting command nothing happens.
I cannot get the geometry or toolpath nesting to work. When clicking on the nesting command nothing happens.
Are you running router?
Did you have the option before?
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
No, the what's new page 11, says its available for mill. Never had router version but we use the mill to contour cut g10 panels and would be nice to nest.
Please review picture.. but this should help clear this up.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .