Hello:
Anyone can give the parameters NC and PC for a Takisawa TC-1 Fanuc 0TC
Thanks.
Or if you have the Ladder and electrical diagrams.
Alexfanuc
Hello:
Anyone can give the parameters NC and PC for a Takisawa TC-1 Fanuc 0TC
Thanks.
Or if you have the Ladder and electrical diagrams.
Alexfanuc
Yes, but I'm assuming its correct and your looking at it wrong. M4 is counter clockwise, M3 is clockwise. Clockwise would be correct if you had a drill bit in the turret.
not necessarily. on my Mori M3 is counter-clockwise and M4 is clockwise.
but it really doesnt matter, just program whichever one (M3/M4) rotates the chuck the way it needs to go for whatever tool you are using.