I have a few Brushless AC Servo Motors and drivers that I was thinking of using to convert my Bridgeport knee mill to CNC. Can anyone tell me if they are good enough for this application?
Y-2023 series
4500 RPM
Power 0.91KW
Continuous Stall Torque 2.5 N-m (22.5 lb-in.)
Peak Stall Torque 7.1 N-m (63 lb-in.)
2000 Count Optical Encoder
3.5" bolt circle mounting
I have only have one of these....
F-4030 series
4000 RPM
Power 1.4KW
Continuous Stall Torque 3.5 N-m (31 lb-in.)
Peak Stall Torque 11.3 N-m (100 lb-in.)
2000 Count Optical Encoder
Nema 56C mounting
Here is a (large) PDF for both Motors
http://www.ab.com/manuals/gmc/GMC-SG...4_1_Motors.pdf
Thanks.
--Eric