we have an leadwell VMC with the Fanuc OM control. The machine came up wit all these alarms at once (417,427,& 437) and the CRT displays "0" value in all axis. Any advise on what could have happened. I thank you for any help with this.
Results 1 to 2 of 2
Threaded View
-
06-24-2015, 02:59 PM #1
Registered
- Join Date
- Mar 2011
- Posts
- 22
fanuc servo aarms 417,427, & 437 fanuc OM control
Reply With QuoteSimilar Threads
-
New Control on Fanuc DC Servo
By LeRa in forum Servo Motors / DrivesReplies: 33Last Post: 10-16-2020, 03:52 AM -
Fanuc <--> Heidenhain encoder converters on Fanuc 21 control?
By laserted in forum FanucReplies: 7Last Post: 11-17-2013, 01:46 AM -
can fanuc ac digital servo amplifiers be run by a controller other than fanuc?
By js412000 in forum Servo Motors / DrivesReplies: 5Last Post: 03-09-2011, 04:11 PM -
Fanuc servo and spindle control with mach3
By marq_torque in forum Servo Motors / DrivesReplies: 2Last Post: 03-23-2010, 08:37 PM -
1982 fanuc 6m control (Enshu) 401 servo error
By Rob Lacy in forum FanucReplies: 7Last Post: 10-26-2008, 08:51 PM
Tags for this Thread
Posting Permissions
