[Mr. Technical]

Hi Guys,

I'd like to replace some missing cables for my VF0-E (very similar to a VF-2). I am trying to find the name of the connector style that is used on the some of the tool changer cable-to-cable connections. Basically a square 4 pin plug and socket similar to the ones used on ATX power supplies. Anyone know a trade name for that type of connector? I have the wiring manual that shows how to make the cable assemblies, so I should be in good shape once I find a source for the connectors themselves. Thanks!

Ian

[robwhi]

Hi Ian

They are Molex Mini fit jnr connectors
You can get them from
Mouser.com or digikey.com or many other molex distributors
I have them in stock but the postage would be a bit from Australia

If you want I can put the part numbers up for you

Cheers

Rob

[Mr. Technical]

Hi Rob,

You are correct sir! I'd looked everywhere for them without success. Once I knew what they were called they were easy to find Then I realized that I am also missing the switches that plug in to the cables there (TC In and TC Out), so I'll get them on order from Haas or equivalent depending on the price. Thanks for the help!

Ian