BREAK-OUT-BOARD:
IPL5X-USB-iso-BOB
Here is my design of a 5 axis isolated USB BOB based on the IPL5X.
Thanks for the dedicated help by Pascal Langer, one of the original designers.
If you can improve, I would like to incorporate it.
Therefore the first 5 posts is subject to editing.
The Linnistepper & Mardus Kreutz 8A Unipolar & Bipolar designs is also included here.
This is Eagle PCB - so that you can use it.
Other files you may need:
5X-Project | Téléchargements
Isolation for the USB:
Adum4160 & USBUF02W6 | EngineerZone