588,662 active members*
5,075 visitors online*
Register for free
Login

Thread: ATC wont reference

Results 1 to 2 of 2
  1. 06-03-2010, 11:21 PM #1
    ceilingwalker
    ceilingwalker is offline Registered
    Join Date
    Feb 2010
    Posts
    45

    ATC wont reference

    Good day. I have a Mori Seiki vertical machining center that I'm having trouble getting it to ref home. I can't perform a tool change because either the magazine or the arm aren't registering a ref position. When I try to mdi a tool change it wont do anything more than drop the pot. Machine was e-stopped during tool change. Thanks for the help.
    Reply With Quote Reply With Quote
  2. 10-28-2010, 03:18 PM #2
    2wheelferrum07
    2wheelferrum07 is offline Registered
    Join Date
    Sep 2008
    Posts
    17
    if you are able to zero return the Z and orient the spindle you should be home free, but that is a big if.
    try M33 (all tools in mag)
    zero return the Z and then mdi m19 and then M33 or any tool change
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. G30 Reference Positions
    By stevo1 in forum Fanuc
    Replies: 5
    Last Post: 11-06-2008, 07:48 PM
  2. over travel in x at reference
    By Don H in forum Hardinge Lathes
    Replies: 3
    Last Post: 10-18-2008, 04:12 PM
  3. Scripting reference...
    By kiwichris in forum NCPlot G-Code editor / backplotter
    Replies: 5
    Last Post: 11-15-2007, 10:36 PM
  4. Reference positions in DIY CNC
    By davidp in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 4
    Last Post: 05-23-2006, 08:48 PM
  5. Programming Reference
    By jhwatts in forum MetalWork Discussion
    Replies: 6
    Last Post: 10-19-2005, 08:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules