Re: Tormach 1100 S3 using Tormach 1.5" face mill....
I have watched the depth of cut and feed rates people have posted that they got from GWizard, and they look to me like they would work quite well. IF YOU WERE WORKING ON A 20 HORSEPOWER MACHINE.
I have been doing this long enough that I have a pretty good what speeds and feeds my PCNC 1100 Series II is capable of, and what I see here ain't gonna happen without doing some damage to your machine.
Can you post a drawing of the part you're going to machine and the material it's made out of?
You can buy GOOD PARTS or you can buy CHEAP PARTS, but you can't buy GOOD CHEAP PARTS.