Fadal nightmare: the service man just left after two days. He was at a loss. During the rigid tap cycle the machine will tap down then alarms out. Error# 13 c axis fault. HELP!
Results 1 to 3 of 3
-
01-16-2013, 11:19 PM #1
Neuer Benutzer
- Join Date
- Jan 2013
- Posts
- 0
The engineer said he has no clue!
-
01-16-2013, 11:28 PM #2
Gold Member
- Join Date
- May 2004
- Posts
- 4519
Call the guys at Welcome to FadalCNC.com or at MAG.
-
01-20-2013, 02:02 PM #3
Registered
- Join Date
- Jul 2011
- Posts
- 105
CCW
Hi !
CCW spindle direction (m4) is working properly ? (try to start with M3 and give M4 to see if it is doin' it)FADAL VMC4020 HT 1995, Z 28" (if true) , 88HS , 10K rmp , 21 TC geneva /rotary/ , VH-65 (A-axis) ,3ph 400V , metric, NO conveyor, No palette. (+alternative DC AMP)
Reply With QuoteSimilar Threads
-
No clue
By mark029 in forum Uncategorised CAM DiscussionReplies: 2Last Post: 01-21-2011, 05:26 PM -
newbie with no clue
By zola10 in forum Australia, New Zealand Club HouseReplies: 2Last Post: 03-29-2010, 08:13 AM -
Hi, I'm new, and I don't have a clue!
By dextavier99 in forum European Club HouseReplies: 0Last Post: 01-29-2010, 09:49 PM -
Clue less and looking for some answers.
By Smitty911 in forum Gecko DrivesReplies: 47Last Post: 03-12-2008, 03:20 PM -
Any clue about these motors?
By r3dsk4r3 in forum RC Robotics and Autonomous RobotsReplies: 4Last Post: 07-26-2007, 04:57 AM
Posting Permissions
