HomeCNC Technologies will give 3 new Liton Poly-Scientific servo motors with USdigital encoders.
The servo motors are 36VDC 430 oz/in peak. The peak amps is rated at 20. I just get a 36VDC 10-15 AMP power supply to run them. The encoder is 250 CPR which will translate to 5000 PPR when connected to a G320 drive. They will produce 1700 RPM and this is why I run them at a 2:1 ratio.
The size of the motors are 2.26 dia X 6.2 long including encoder. The staft is 1/4" dia as sticks out .750 long.
They are clasified as Nema 23 size. They don't have mounting brackets with them, they only have 4 6-32 hole on 1.531 B.C.
To win simply post here in the thread the date that you think the site will hit 1000 member's. Remember only post once and you will not able to edit that guess after the fact. the only caviat is that the winner has to pay shipping, but that is more than fair. He accepts PayPal or bank check for shipping payment.
Thank you all and Homecnc for his generous offer.
All guesses must be placed by 6/8/03 midnight est.