[ClaudioG]

Hi All,

Details for the next bi-monthly Brisbane CNC User Group meeting is as follows;

Date: Saturday 11 July 2009
Time: 10am till around 3pm
Where: Zillmere QLD (please email me at karmann68 at gmail dot com for my address and phone # as I won't be posting it on an open forum)
What to Bring: A machine, parts, work pieces or something else of interest. Alcohol

For those who cannot get there by car, I am about a 10min walk from Zillmere train station and close to buses being just near Church & Zillmere Roads.

I have a WidgitMaster Wide CNC Machine (550mm x 210mm cutting area) running Mach3 and VCarve Pro that I will have setup and would encourage others to bring their (small) machine or other items of interest to discuss with others.

I have an upstairs covered deck around 7m x 4m and also some space below for larger or heavier equipment. I only have 1 (or maybe 2) folding 6ft tables so if you are able to bring another along please let me know.

I'd like to make it fairly informal, however it would be good to have at least 30-60min set aside to have someone discuss a topic of interest. I'll get more details on the previous day up at Boris's and try and not go over the same topic. If you have any suggestions or would like to volunteer, let me know. I have a 50" Plasma Monitor that we can all huddle around.

Unfortunately for me Boris raised the bar fairly high, so I won't even try and top him Sorry I couldn't be there.

I will supply the basics for a BBQ (sausages, bread, sauce, soft drinks, plates, cutlery) so BYO the rest (alcohol, steaks, etc). If numbers exceed my expectations, then I might need to ask for a small donation.

RSVP by posting a reply to this post and let me know if you are bringing a machine so I can allocate space and power for it.

Look forward to seeing you all again and meeting some new faces.

Cheers,

Claudio


RSVP's
Confirmed: 11
Maybe: 0
CNC Machines: 2 Confirmed 1 Maybe

Name - user ID - status
1. Claudio - ClaudioG - Confirmed (bringing WidgitMaster CNC Wide Router running VCarve Pro & static WidgitMaster Midi (For Sale) )
2. Darryl - dgreensill - Confirmed (bringing all of his portable machines )
3. Mark - SimjetAU - Confirmed (bringing bells )
4. Zig - Zig - Confirmed
5. Chrisjh - Chrisjh - Confirmed (might bring partly assembled lathe as shown in pics at post #4)
6. Rosco - sco - Confirmed (bringing along CAD plans of a CNC router and offered to demo CAD to GCode process using Rhino products)
7. Steve - stevejw - Confirmed
8. Brian - electrolight - Confirmed (bringing photos of X2 Mill)
9. Graham - gpday - Confirmed (bringing photos of CNC router)
10. Glenn - tt-boy - Confirmed (bringing his electronics experience)
11. Stevie D - Treble Left - Confirmed (bringing examples of completed work pieces - guitars??)

[SimjetAU]

I will be there with bells on

Mark Kyle

[Zig]

Hello Claudio..

Thanks for the invitation. I look forward to meeting the group.

I am north side too , Mango Hill.

Zig

[Chrisjh]

Hi Claudio,

I will be attending. All I will need is power for my laptop.

I hope to bring my partly assembled lathe for show and tell.

Progress has been good so far.

I am currently designing a stand and coolant tray to mount the lathe.

Regards

Chrisjh

[ClaudioG]

Numbers are climbing quickly which is good to see, so thanks for the replies guys.

Nicely built lathe there Chris, would be great to see it on the day, as I for one would be interested in a CNC lathe in the future.

Power is not a problem and I have plenty of extension cords and power boards with a dedicated 20A circuit nearby.

For those who might want to fly into Brisbane, I'm about 15 minutes from the airport and might be able to pick you up or have someone else do it. Alternatively you can catch a train to Eagle Junction and swap to the Caboolture train and get off at Zillmere. Or a cable ride is about $30 to $35.

Cheers,

Claudio

[sco]

Thanks for the invite. ...I will be there!

I can offer my plans for the CNC router that I built in CAD form.

I can also offer to show how I have been getting my CAD stuff into Gcode with Rhino and RhinoCAM, if anyone is interrested. (I am fairly new to doing this but am doing ok I think, so some others that are more experienced may be able to show me a better way, (which could turn into a good work-shop) or that can be put off for another day if you already have enough stuff to talk about. I don't mind.

cheers
rosco

[stevejw]

Hi CladioG,
I am new to CNC and the Zone but from Brisbane and would like to attend if that's ok

Cheers
Stevehttp://www.cnczone.com/forums/images/icons/icon7.gif

[ClaudioG]

You are more than welcome Steve. Read as much as you can on CNCzone and other sites before hand and you'll get more value out of the day. Lots of great info and people around.

This is open to anyone interested, and I'm more than happy to have vendors of related products come along (if the majority of the group agree) and show their products in a casual way without pushing products down peoples throats

Cheers,

Claudio

[electrolight]

Hi Claudio

I will get there - but I will have to leave at about midday due to commitments.

I will bring photos of my X2 mill -it is bolted down.

See you

Brian

[gpday]

Hi Claudio

I will be there. I'll bring some photos of my router and talk about its development & construction (over the years)

Cheers
Graham

[dgreensill]

I'll definitely be there!

[ClaudioG]

Excellent Darryl. So which of your 4 machines will you be bringing

Looking like a great gathering so far.

Cheers,

Claudio

[dgreensill]

Excellent Darryl. So which of your 4 machines will you be bringing

Looking like a great gathering so far.

Cheers,

Claudio

All the portable ones!

[tt-boy]

Claudio,
I'm new to CNC but I would love to come and talk shop if that's ok.

I have a 3-in-1 Lathe/Mill which I have been thinking of converting for a while.

What I can offer is lots of electronics experience if anyone needs help.


Cheers,
Glenn
(Wakerley, Qld)

[ClaudioG]

You're more than welcome to come along Glenn and anyone else who is new to CNC. Again, what I would suggest is reading as much info on this and other internet resources and you will get a lot more out of the day.

And I'm sure they'll be people after help with electronics.

Cheers,

Claudio

[Treble Left]

I will definitely be there, it will be great to meet you all.
as it is a fair bit bigger than my car. I would like to bring my CnC Router along but realistically it is a fair bit bigger than my car can accommodate.
May have to settle for some physical examples or software ones.

Looking forward to meeting you all,

Stevie D

[ClaudioG]

Hi Stevie D

Anything of interest you can bring along would be great. Completed work pieces usually generate a fair bit of discussion.

Cheers,

Claudio

[David_AVD]

Hi Claudio,
I'd like to come along. Thanks.

[ClaudioG]

OK

So I don't be able to Edit the original post anymore so here's the latest RSVP list.

Cheers,

Claudio

RSVP's
Confirmed: 12
Maybe: 0
CNC Machines: 2 Confirmed 1 Maybe

Name - user ID - status
1. Claudio - ClaudioG - Confirmed (bringing WidgitMaster CNC Wide Router running VCarve Pro & static WidgitMaster Midi (For Sale) )
2. Darryl - dgreensill - Confirmed (bringing all of his portable machines )
3. Mark - SimjetAU - Confirmed (bringing bells )
4. Zig - Zig - Confirmed
5. Chrisjh - Chrisjh - Confirmed (might bring partly assembled lathe as shown in pics at post #4)
6. Rosco - sco - Confirmed (bringing along CAD plans of a CNC router and offered to demo CAD to GCode process using Rhino products)
7. Steve - stevejw - Confirmed
8. Brian - electrolight - Confirmed (bringing photos of X2 Mill)
9. Graham - gpday - Confirmed (bringing photos of CNC router)
10. Glenn - tt-boy - Confirmed (bringing his electronics experience)
11. Stevie D - Treble Left - Confirmed (bringing examples of completed work pieces - guitars??)
12. David - David_AVD - Confirmed

[robwhi]

Hi Claudio

I would love to come along as Chris mention this group to me the other week.

I have another BBQ to go to But I will try and get out of it :-)

I am only at Nudgee so I am pretty close

I have a KX1 That I could Bring if any one is interested to play with.
I might need a hand to lift it though into the back of the ute?

Cheers

Rob