What suggestions does anyone have that could make Dolphin CAD/CAM better? Any comments would be great. Thanks
What suggestions does anyone have that could make Dolphin CAD/CAM better? Any comments would be great. Thanks
Full 4th Axis Milling, Turning, and 5 Axis Milling. Trunion Indexing to start would be fine. Lots of shops are starting to buy these machines from HAAS.
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
Have a "generic" tool library already included. Mainly I would like this for the lathe functions.
Icon size customization. Allows for smaller or larger icons. For those of use who have small screens, we need all the precious desktop space we can get.
Direction, Commitment, Follow Through
We are working on the generic tool library. In regards to the smaller and larger icons, you can already customize them in the current version. If you go to the menu "View", then "toolbars", you can choose between "large icons" or "small icons".