im lookin for the EZ Track DX program for personal use at home. I want to do some work at home and then load it up to our Bridgeport CNC
Any Ideas where i can find this? My Boss has no idea where our copy is
Thread: EZ Track DX Program Needed
Results 1 to 6 of 6
-
07-29-2005, 11:04 PM #1
Registered
- Join Date
- Jul 2005
- Posts
- 10
EZ Track DX Program Needed
-
07-30-2005, 12:38 AM #2
Moderator
- Join Date
- Nov 2004
- Posts
- 3028
I will see if it is still available from Hardinge.
It is called EZ-SPS Mill.
George(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
08-01-2005, 03:03 AM #3
Registered
- Join Date
- Jul 2005
- Posts
- 10
anyone.................. can anyone help me out here? please feel free to leave a message
-
08-08-2005, 04:42 AM #4
Moderator
- Join Date
- Nov 2004
- Posts
- 3028
My parts man says this is available from EZCAM.
George(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
08-08-2005, 05:46 PM #5
Registered
- Join Date
- Jul 2005
- Posts
- 10
ok so where do i find this
-
08-09-2005, 01:25 AM #6
Moderator
- Join Date
- Nov 2004
- Posts
- 3028
I did a google search and I think he is wrong. Call 1-800-245-2598 central time and ask for Alan. Ask him about EZ-sps mill.
George(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Reply With Quote
Posting Permissions
