Does anybody use Mazatrol MT Pro here..?
It seems the controller doesn't like ARC shape (milling unit).
We put the same number to our M64...it works just fine.
I am just wondering if it happens to MPro machine too...
We use Griffo MTPro DataEntry for offline programming...it fast and we can check the shapes using 3D view ( we imported the shape from SolidWorks to Griffo MTPro directly ).
We can send the .pbb file If somebody want to try to put in their machine.
Thank's
Thread: Mazatrol MT Pro
Results 1 to 2 of 2
-
01-13-2006, 02:01 AM #1
Registered
- Join Date
- Jan 2006
- Posts
- 7
Mazatrol MT Pro
-
08-12-2006, 05:01 AM #2
Registered
- Join Date
- Aug 2006
- Posts
- 62
If you send the program to me I will give it a try we use Griffo. There are some Parameters you can change if the machine doesn't like the start or end point of a arc. Also if the arc is more than 90 degrees you could try breaking it up into 1/4's.
Here is a new forum for Mazak Integrex machines. http://integrexmachinist.com/
Reply With Quote
Posting Permissions
