On my brother tapping center the CRT screen is broken. So now I put an external TV on it and it works fine. But is want to put a screen back into the machine. I bought a TFT monitor and installed into the machine. But than the problem begins. The TFT display is working but the image is not steady. I think it has some problems with the frequentie.
Do some body know if i can make a convertor or a way to make the image steady. It's like it missing some frames per second.
Thread: Brother TC-215 CRT problems
Results 1 to 3 of 3
-
01-14-2006, 10:58 PM #1
Registered
- Join Date
- Aug 2005
- Posts
- 13
Brother TC-215 CRT problems
-
01-14-2006, 11:16 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24220
Was the monitor you replaced it with a analogue VGA or TTL? if so what resolution?
I assume you have fitted a TFT monitor with built in display controller , does it have 15pin vga or 9 pin connector?
Some of the older CRT displays were low freq EGA.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
03-29-2006, 09:23 AM #3
Registered
- Join Date
- Mar 2005
- Posts
- 171
Do you upload and download programs from your Brother CNC to a computer?
If so, what cabling and software are you using?
Thanks
Ben
Reply With Quote
Posting Permissions
