Originally Posted by
emexcee380
Good Morning Daewoo Homies,
Our '04 PUMA 240 MSB w/Fanuc 18iT control came up with an alarm this morning during
normal operation : ALARM 2047:TURRET CLAMP SW. OR TURRET CONTROL
UNIT ALARM
We checked the TURRET CLAMP input signal X7.0 = 1 indicating the CLAMP switch
input was correct.
Next, we inspected the ProMotion AC Servo Drive for the servo turret and found that it
was displaying: ALP - n in its LED window. Also, the TOOL NO. display on the control
operator panel displays: 12 - 00 - 12 - 00 although tool station #7 is in-position.
We have the manual for the ProMotion drive (DASD-CT15) but this particular alarm is not
listed in the page of alarms.
Can someone ("CALLING DARRYL HARDT !?!?) please advise on how to remedy this alarm?
Thanks in advance for any knowledgeable responses.
emexcee380