can anybody tell me what size acme or threaded rod can be used to build a six by six cnc router
can anybody tell me what size acme or threaded rod can be used to build a six by six cnc router
If you want your cut area to be 6 feet then you will need an 8 foot acme rod.
Jason
what size acme rod
what size acme rod
You'd be much better off with rack and pinion.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
im doing research on rack and pinion in diy cnc forum trying find prices and sizes to use
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)