Hi,
We are trying to initialize a bubble mamory in a Fanuc 6A controller, we did this before in a 6B with no problem but it seems that the procedure is different. Could someone tell us how to do this???
The first screen only shows the 3 first options.
Thak you.
GP.
Results 1 to 3 of 3
-
11-26-2007, 11:40 PM #1
Registered
- Join Date
- Sep 2007
- Posts
- 371
Fanuc 6A bubble memory initialization.
-
11-27-2007, 02:34 AM #2
Member
- Join Date
- Apr 2006
- Posts
- 213
You cannot reinitialize the bubble memory on a Fanuc 6A control.
You can put the bubble board in a 6B control and reinitialize then put the board back inthe 6A and reload parameters.
-
11-27-2007, 04:57 PM #3
Registered
- Join Date
- Sep 2007
- Posts
- 371
Thank you very much, we will do that inmediatelly...
GP.
Reply With QuoteSimilar Threads
-
How do i format the bubble memory
By MT4X4 in forum FanucReplies: 3Last Post: 05-01-2007, 06:42 AM -
Fanuc Bubble memory
By golfengraver in forum FanucReplies: 2Last Post: 11-13-2006, 05:16 PM -
Bubble memory
By Darkos in forum FanucReplies: 3Last Post: 06-06-2006, 09:29 PM
Posting Permissions
