587,943 active members*
3,432 visitors online*
Register for free
Login

Thread: Need Info on Hardware suppliers

Results 1 to 3 of 3
  1. 08-14-2006, 05:12 AM #1
    speedster
    speedster is offline Registered
    Join Date
    Sep 2005
    Posts
    3

    Need Info on Hardware suppliers

    I am in the information gathering stage of building a plasma table. I like the design submitted by mlaws1172. Thanks for your generosity.
    I have a concern as far as deflection of the gantry as it is driven only from one side. Is this a concern or not?
    Also I am looking for suppliers of linear rails and bearing blocks and such. Any information will be much appreciated.
    Reply With Quote Reply With Quote
  2. 08-14-2006, 07:28 AM #2
    mlaws1172
    mlaws1172 is offline Gold Member
    Join Date
    Mar 2005
    Posts
    361
    Deflection is not a problem and it runs very smoothly. I would take a look at VXB bearings on ebay for some shafts and bearings.
    If I can help let me know
    mike
    Reply With Quote Reply With Quote
  3. 08-15-2006, 01:47 AM #3
    speedster
    speedster is offline Registered
    Join Date
    Sep 2005
    Posts
    3

    Smile

    Thanks alot for the info. I'll see what I can find, and as soon as I can get a bay opened up in my shop I hope to at least build the table frame. Thanks again for your help.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules