[S V R E]

Need to have some NHRA Pro Stock heads simi finished. These heads are unmachine cores that need to have all the surfaces , valve guide, bolt holes,and dowel holes machined and tapped. Need to be a 5 axis machine to do the spark plug holes and the intake valve guide hole. (they are canted)
This is low quantity as of right now, but could be high volume in time.

Thanks

Steve Vance
704-701-4235

[svp]

Steve, what is your time-frame, and what exactly do you consider low-quantity?

Steve H
SVP

[svp]

Steve, what is your time-frame, and what exactly do you consider low-quantity?

Steve H
SVP

[S V R E]

Time is not a big deal. As of right now, I will just need one set to get started. After that, if all goes well, it will be about 10 set at a time.

Steve

[svp]

Can you send me a drawing of what you need cut? I take it you want all but the final port configs?
Call me at 831-422-2484, and we can discuss.

Thanks
Steve