Hello, We have the following problem with the above mentioned machine. First, I need to mention machine had been out of service for several years and, really don't know well it was maintained. The problem is, that after finally getting running, I noticed that when I close the cabinet door control side (right hand side) after while machine stop and, get an alarm. The alarm is random could be an axis over travel, spindle , etc... It is none of these. I open door, machine run all day without alarm. I checked all, the cables, wires, boards for a faulty contact. connection. loose, what so ever. Every thing ok. But, close the door, after awhile, alarm again. Thank you for any feed back on this.