[tmdmach]

I just bought a Dainichi B45 lathe with a Fanuc 10T-F control. The model year says 1985 on the Fanuc tag. This machine sat for 2 years and as you guessed, the batteries ran out. I am looking for a parameter list if by chance anyone may have one. I figured I would check here first. I'm going to call Dainichi tomorrow. Also, on the motherboard (I think that's what it's called) the LED indicator shows a number 8. Any info would be greatly appreciated.
Tom

[greenery_fr]

I just bought a Dainichi B45 lathe with a Fanuc 10T-F control. The model year says 1985 on the Fanuc tag. This machine sat for 2 years and as you guessed, the batteries ran out. I am looking for a parameter list if by chance anyone may have one. I figured I would check here first. I'm going to call Dainichi tomorrow. Also, on the motherboard (I think that's what it's called) the LED indicator shows a number 8. Any info would be greatly appreciated.
Tom

You should clear all data by keep press 7 and 9 then power on.

[cncdiag]

Could be a bad power supply, this will cause an alarm 8