[Hughmullersa]

Hi Guys
Greeting from South Africa
I am looking at building my first table anyone able to assist with plans and info

I am looking to plasma cut steel parts and Cnc aluminum parts
The whole reason behind this is to design and build one off pats for car build I do as a hobby

Regards
Hugh

[cabrite]

Where are u in SA i am in PE

[Hughmullersa]

I am in JHB

[meatwagon]

Hi Hugh,
I'm in the middle of a 4'x8' plasma table build in Juneau, Alaska. I've been documenting it here. I'm using the plasmabot 5.0 gantry kit. I'd recommend it except the proprietor seems to have shut down his site. I'm still welding the frame and trying to decide which electronics I'm using. PM me if there's anything I can do to help.
-Adam

[Hughmullersa]

Hi Hugh,
I'm in the middle of a 4'x8' plasma table build in Juneau, Alaska. I've been documenting it here. I'm using the plasmabot 5.0 gantry kit. I'd recommend it except the proprietor seems to have shut down his site. I'm still welding the frame and trying to decide which electronics I'm using. PM me if there's anything I can do to help.
-Adam

Hi Adam
Thanks and good luck with your build

Will go through it tonight and tomorrow if I have any questions I will message

Alaska lovely place one of the few places on my bucket list