I am trying to find a hotkey or the abilty to reset an estop with an external switch. I don't see anywhere to assign a pin directly, is there a hot key to do it, that I can assign to a pin?
I am trying to find a hotkey or the abilty to reset an estop with an external switch. I don't see anywhere to assign a pin directly, is there a hot key to do it, that I can assign to a pin?
I think this is how you do it. On the input page, set OEM Trigger#1 to your external switch. Then, on the hotkeys page, set the trigger #1 code to 1021.
You might want to read through the customization Wiki at www.machsupport.com
All the codes can be found there.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Worked like a charm! Thanks!