Hi all,
I am looking for Mazatrol Cam T2 (Hardware & Software) manual. I can't find in Meau site. I only found M & T plus, M3, M0 and M2 manual in there. Any one known kindly inform.
Thank you.
Hi all,
I am looking for Mazatrol Cam T2 (Hardware & Software) manual. I can't find in Meau site. I only found M & T plus, M3, M0 and M2 manual in there. Any one known kindly inform.
Thank you.
The M2 and T2 controls were almost identical. The M2 Maintenance manual is for the generic Mitsubishi M2 control that you would find on such machines as OKK. The hardware is pretty much the same for all Mazak M2 and T2 machines so the M2 Maintnenace Manual should work fine for your machine. Is ther a specific piece of information you are looking for?
Thank you very much for your great information. After I study M2 manual I found that the card name like FX cards, they are not same. I want to know all system structures so that I can clear and understan more for all card details. Some time Ram, Rom or others card problem I can find them easy if I know the system structure like how to initialize mamory or some thing like this. Do you have all Option (OP1-OP16) parameter meaning? Some alarm on T2 manual said not clear. Kindly advise me again.
Thank you and best regards,
I have recieved very useful information from you all. I bought a mazatrol cam t2 lathe with no literature. the screen shows mostly japanese characters (JPK). How do I switch to English.
Wow! where did you find this machine ? It's appeared coming directly from Japan?
You cannot switch any different Language on the T2, M2 or so,
the lang is programmed in the EPROM on the FX 784-9 at the adress 13J and 13K (You'll find 2 Eprom where is writed (FX784-8 Somethings Version LANG.....Something)
You have to find some language comprehensive for you English, French, Deutch, ETC
Let me know witch one you need
I may be can help you
Regards
JL
Machines Tools Services
France
DEAR SIR.
I AM SO SORRY BECAUSE BOTHERED YOU.
CURRENTLLY, MY MACHINE IS QUICK TURN 8 WITH MAZATROL CAM T2 CONTROLLER.
IT WAS HOOK UP WITH ALARM " EXCESSIVE ERROR X", AFTER I CHANGE THE BOARD FX61C THIS ALARM IS CLEARED.
BUT, ALL MODE AS HANDLE, MDI, JOG, HOME ARE DEFFECTIVE AND WHEN I PUSH RAPID BUTTON THEN THE ALARM "281-ORIGIN RESTORATION NOT COMPLETED FAST FORWARD PROHIBITED"
MY MACHINE WAS LOST OF ALL THE DOCUMENTS.
SO PLEASE GIVE SOME INSTRUCTION FOR SOLVE IT.
I AM VERY GRATEFUL WITH YOUR HELP.
THANKS AND BEST REGARDS.