I have been working on a hurco post and got the alarm "ncpp not purchaced" or something like that. Am I right to assume that this has to do with the nc part plane being selected with the g17? I am altering a post I already have from Cimatron, right now in IMS, but will be updating to GPP2 when I get time.
this is the first line of the out of the box post
G94 G98 G17 G20 G40 G15 G80 G49 G0 G50 G90 G54 G68 G67 M5 M9
and for a tool change i get this
T02 L2 M6
at the the end an M2
I am pretty unfamiliar with the hurco controllers, so any help would be appreciated. Most of my experience is with the fanuc family of controllers.
Danny