Hi everyone,
I'm hoping that someone might be able to help be figure out what is going on with my Mach3 milling program, 3D adaptive tool path generated in fusion360.
The adaptive tool path runs great for the first 47891 lines of code but somewhere on the next few lines the steppers make a noise like they've hit their hard limits and the machine coords are all pulled off, and by the time it runs a big linear move on line 47906, it's very obviously in the wrong place by several centimetres.
I have soft limits (I think) correctly set up: before I start the program I set the machine coords to the hard limits of the X,Y and Z axes. I then switch on soft limits and jog until the soft limits come into play, correctly.
I'm sure this is a super rookie question but it keeps happening despite the tweaks I've already made. I've been looking at different simulators and think that the issue lies in line 47892: G3 X-5.118 Y31.631 I-0.028 J0.8
thanks in advance to anyone who reads this!
full code file is here: https://drive.google.com/file/d/1O8e...ew?usp=sharing