Nevermind! I have figured out my problem! Thanks Anyways!
Nevermind! I have figured out my problem! Thanks Anyways!
I have a similar problem. Could you share your solution?
Well, what behavior is it exhibiting? There are so many things that can go wrong there just simply cannot be one solution. Mine was rather mundane but everyone told me a different thing. Turns out as I was watching it that it wasn't the CAM software, the electronics or even the mill machine but a dirty collet that was allowing the end mill to slip when it got hot. So, there really is many reasons you can be missing steps but I would have to know why you think it's missing the steps in the first place to give you a starting point.