I have a TT1800SY we're trying to tool up on the floor. Weirdest moment ever was realizing the std tool holders are 3/4" (even single up holders) Problem because we have a dual channel high pressure coolant system inbound (coolant is STUPID important), we've purchased the tooling package in 1" ISCAR JHP and Iscar doesn't have a 3/4" DNMG 442 holder with coolant through in 3/4". I can't even exchange the toolholders for something else because the iscar solution doesn't exist. All of our other turning centers use 1" tools and they have 20HP main 10 sub not 30/30 like the beast here from Doosan. I don't understand doing more with less in a 3/4" holder without coolant support.
I bought 4 of Lyndex Nikken's 1" BMT55 holders. PROBLEM They don't fit between the turret and the turret housing. I don't have a Doosan parts department number, and they don't have a website where people can peruse parts as far as I know. I'm screwed here. Getting machines off the ground is stressful as hell and we need to get tools in this machine or we're dead in the water.
Does anyone know where to find a compatible 1" stick holder?