[inspection_connection]

Hi all,

I'm after information on what milling machine would be most suitable for creating a perspex wedge from rexolite 1422. The wedge angle needs to be consistent. I also need the ability to add screw holes and bore holes but the most complex part is an angled/serated slope on front of the wedge (later to be filled with a permabond). I have attached some pictures (hopefully they show up).

Thanks in advance for any help

[awerby]

Any milling machine and most routers would be able to cut it, assuming it's a machinable plastic. The decision would depend on how big your part had to be. Sorry, your pictures aren't showing.