Hi all!

Well, I got kinda stuck with my recent project here.
I'm planning to build a little cnc router 50x50cm and 25cm high to make wooden lures!

So I allready got all the mechanical stuff and so on, and also bought me this ( not from the same site though )
Aliexpress.com : Buy 3DV4 CNC Shield V4 + Nano 3.0 + Reprap Stepper Drivers Set for Arduino Free Shipping from Reliable set palette suppliers on TUTO Technology | Alibaba Group

I really wanted the Gshield v5 ( gShield v5 - Synthetos ) from synthetos but when the shipping is as much as the product itself I consithered looking for something cheaper.


I've seen many vids on youtube where people use the arduino nano and it works like a charm so I thought that would work just as fine!

But for some reason I cant get grbl on my arduino nano :/.
I use the arduino IDE as it is supposed to work on the newest version and tried all that you're supposed to do and choose the grbl library and upload it etc..

Has anyone here used the nano for grbl or maybe even the same shield as i bought?

I hope i can get some help really good help, thanks in advance!
And sorry if my english is a bit wierd :P I'm Swedish !