587,558 active members*
3,340 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Tree > Tree VMC 1060 on overlimit sw error

Thread: Tree VMC 1060 on overlimit sw error

Results 1 to 2 of 2
  1. 09-21-2011, 05:42 PM #1
    wildwhl
    wildwhl is offline Erfahrener Benutzer
    Join Date
    May 2010
    Posts
    327

    Tree VMC 1060 on overlimit sw error

    Please read here - post 8:

    http://www.cnczone.com/forums/tree/1...tml#post996051


    Thanks!

    WW
    Reply With Quote Reply With Quote
  2. 09-25-2011, 01:47 AM #2
    wildwhl
    wildwhl is offline Erfahrener Benutzer
    Join Date
    May 2010
    Posts
    327
    Solution - had to *tap* the axis off the limit. Couldn't find any way of manually moving it, and fault/reset/etc. held down did not activate the servo drives.

    WW
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Going to leap from X2...to Tree VMC 1060 - advice!
    By wildwhl in forum Benchtop Machines
    Replies: 2
    Last Post: 06-26-2011, 04:13 PM
  2. Tree 330 with error codes
    By ktmrider in forum Tree
    Replies: 2
    Last Post: 08-18-2010, 04:37 PM
  3. Tree VMC 1060
    By StahlMachine in forum Tree
    Replies: 2
    Last Post: 12-27-2007, 03:55 PM
  4. Zps Tree Vmc 1060 Way Cover
    By envisioneng in forum Tree
    Replies: 1
    Last Post: 07-25-2007, 05:33 PM
  5. num 1060 or the like
    By sc_crasher in forum Fanuc
    Replies: 3
    Last Post: 01-12-2006, 02:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules