I needed to mill three small aluminum gears so I modified a drill press vise to hold the part.
See it here:
[ame=http://www.youtube.com/watch?v=9rARCzkyhI4]KRMx02 Milling Aluminum - YouTube[/ame]
I needed to mill three small aluminum gears so I modified a drill press vise to hold the part.
See it here:
[ame=http://www.youtube.com/watch?v=9rARCzkyhI4]KRMx02 Milling Aluminum - YouTube[/ame]
Author of: The KRMx01 CNC Books, The KRMx02 CNC Books, The KRmc01 CNC Milling Machine Books, and Building the HANS Electric Gear Clock. All available at www.kronosrobotics.com
Both the video and the cutting are nice!
Did you buy this CNC ready to cut or you built it?
What was the price or cost?
Thanks
Paul
Its built from a book I wrote.
You can see it here:
Building the KRMx01 CNC
This build is a small one 18" x 14". I also have a 30" x 27" that I built. The design supports up to 5' x 12'.
This build is for a couple demos I am doing at the DC Science and Engineering fair in April. Also a Robot fest in April as well.
Author of: The KRMx01 CNC Books, The KRMx02 CNC Books, The KRmc01 CNC Milling Machine Books, and Building the HANS Electric Gear Clock. All available at www.kronosrobotics.com
For the 18"x14" one. Do you have any one available for sale?