Hi,
I have a Merchant Dice machine which runs well and is ideal for me to learn on. Problem is the Kress router which came with the machine has burnt out/stopped working after only a few hours of operation. I've read that this is a common problem with these routers so need to upgrade. I don't have much technical nohow but am thinking a watercooled chinese spindle capable of cutiing both wood (primarily) and soft metals where needed.
Any advice is very much appreciated as to where/who to buy from.
I have had a look on both ebay and Amazon but not really sure what would be best to use with my machine.
I realise I will require a new spindle mount, pump etc so any help with links to these as well would be most helpful.
I should mention, I am using the machine to cut out guitar bodies primarily.
Thanks in advance
Neil